SPC Floor 7446-3

Short Description:

Fire rating: B1

Waterproof grade: complete

Environmental protection grade: E0

Others: CE/SGS

Specification: 1210 * 183 * 4.5mm

Product Detail

Product Tags

Product Description

SPC flooring is mainly calcium powder as raw material, by UV layer, wear-resistant layer, color film layer, SPC polymer substrate layer, soft and silent rebound layer. In foreign home improvement market is very popular, used for home floor is very suitable.

SPC flooring in the production process without glue, so no formaldehyde, benzene and other harmful substances, the real 0 formaldehyde green floor, will not cause harm to the human body.

Because SPC flooring consists of wear-resistant layer, mineral rock powder and polymer powder, naturally not afraid of water, there is no need to worry about the home floor by blisters caused by deformation, mold problems. Waterproof, mold-proof effect is very good, so the bathroom, kitchen, balcony can be used.

The surface of the SPC floor is treated by UV, so the insulation performance is good, even if barefoot stepping on it will not be cold, very comfortable, and added a rebound technology layer, there is better flexibility, even if repeated bending 90 degrees can, do not worry about falling pain, very suitable for families with elderly children

1. Suggestions for cement floor laying: if the flatness of the original cement floor is acceptable (the fall of the 2-meter ruler against the ground is not more than 3 mm), the lock floor, glue free floor and ordinary stone plastic floor can be directly laid on the original floor, and the color can be wood grain, stone grain or carpet grain. If the original cement ground is not smooth, but the hardness is enough, and there is no sanding, a layer of self leveling must be made to make up for the flatness of the ground. If the original ground has serious sanding, it must be leveled again with cement mortar, and then self leveling or direct laying of the floor.

2 . Tile, terrazzo floor laying suggestions: if the ground is relatively flat, the gap is relatively small, not loose, it is recommended to choose lock floor, ordinary stone plastic floor directly.

Feature Details

2Feature Details

Structural Profile


Company Profile

4. company

Test Report

Test Report

Parameter Table

Surface Texture Wood Texture
Overall Thickness 4.5mm
Underlay(Optional) EVA/IXPE(1.5mm/2mm)
Wear Layer 0.2mm. (8 Mil.)
Size specification 1210 * 183 * 4.5mm
Technical data of spc flooring
Dimentional stability/ EN ISO 23992 Passed
Abrasion resistance/ EN 660-2 Passed
Slip resistance/ DIN 51130 Passed
Heat resistance/ EN 425 Passed
Static load/ EN ISO 24343 Passed
Wheel caster resistance/ Pass EN 425 Passed
Chemical resistance/ EN ISO 26987 Passed
Smoke density/ EN ISO 9293/ EN ISO 11925 Passed

  • Previous:
  • Next: